Open up Device Manager to determine your console port. Putty is a small simple client available for download here. Navigate to 'Save setup as dfl', hit "enter", and then "esc".If needed, modify the settings to match this and hit "esc" when done:. Type "a" and change location of serial device to '/dev/ttyUSB0' then hit "enter".'picocom' is a very small and simple client. Be sure to replace the serial device string with that of the device on your workstation. These examples demonstrate all three applications and assume that the serial device is "/dev/ttyUSB0" which is common for USB adapters. There are many serial terminal applications for Linux, three common used applications are 'picocom', 'screen', and 'minicom'. The serial console is provided through this port at 115200 baud, 8n1, with no flow control. The TS-7680 includes a USB device port, this uses an 8051 based microcontroller to create a serial device on a host PC. Development will include accessing drives formatted for Linux and often Linux based tools. It may be possible to develop using a Windows or OSX system, but this is not supported. Most of our platforms run Debian and if there is no personal distribution preference this is what we recommend for ease of use. For users in Windows or OSX we recommend virtualizing a Linux PC. This is a small embedded board with an NXP i.MX286 454 Mhz ARM9 CPU with 128-256MB DDR2.Ī Linux PC is recommended for development, and will be assumed for this documentation. The TS-7680 has been officially released in April 2016.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |